Our testing laboratory is equipped with modern testing equipment that meets Russian and global requirements and carries out mechanical and climatic tests, multiple and single impacts, linear acceleration, exposure to solar radiation, high humidity, as well as static and dynamic dust tests, atmospheric pressure, electric insulation strength in accordance with the field of certification.
List of types of tests conducted in the control and testing laboratory of JSC "PA “UOMP"
|Types of tests for external factors effect||Designation of RD establishing test standards||The ranges of characteristics of the external factors reproduced by the measuring equipment||Mass-dimensional characteristics of the tested products,|
kg, mm х mm х mm
|1 High ambient temperature test||For periodic tests, the technical conditions for the products tested.|
In the case of standard tests, test programs, GOSTs, OSTs.
In the preliminary testing of prototypes of products - the program - the methodology and the draft specifications.
In case of acceptance testing, the technical conditions.
Programs and techniques when working out prototypes of products.
|Temperature effect from 0ºC to + 150ºС|
|2 Low ambient temperature test||Temperature effect from 0ºC to -70ºС|
|3 Exposure to high humidity||Relative humidity from 10% to 98%|
|4 Temperature change test||Temperature effect from -70ºС to +150ºС|
|5 High pressure air (gas) test||Increased pressure up to 3 atm|
|6 Rapid change in pressure (take-off) test||Low pressure up to 30 mm Hg|
|7 Sand and dust tests||Air speed 1.0 m/s|
|8 Leak tests||Minimum flow of helium not more than 7х10-12 m х cPs|
|9 Tests for the effects of atmospheric precipitation (rain)||Rain intensity 5 mm|
|10 Vibration tests||Vibration effect in the frequency range from 5 Hz to 2000 Hz with acceleration from 3m / s2|
|11 Impact tests|
Impact from 20 m/s2 to 150 m/s2 for a duration of 15 ms to 20 ms
Maximum acceleration 1,000gDuration from 2 ms to 35 ms.
Duration from 2 ms to 35 ms. (half-sine) 10 ms to 70 ms trapezoidal
|12 Linear acceleration resistance tests||Linear overloads from 10 m/s2 to 500 m/s2|
|13 Dielectric strength of insulation||Operating voltage range up to 10 kW AC and DC|