DS8-70 LED traffic light with blinking mode
It is used as an additional equipment in unregulated pedestrian crossings to attract the attention of drivers to improve road safety.
LED impulse display, especially at twilight and night time, allows you to identify a pedestrian crossing or intersection from a long distance and provide a safe driving regime in advance.
Structurally, the product is made in the body of the traffic light section Ø200mm.
As the light source, yellow LEDs are used in traffic lights, which allows to reduce power consumption and provide a long service life.
The traffic light housing is made of a shock-resistant polymer material resistant to UV radiation.
The traffic light is manufactured in the UKhL climatic version, category 1 according to GOST R 52282-2004.
Light emitting diodes
|Diameter of light aperture, mm||Ø200|
|Lighting parameters||According to GOST R 52282-2004|
|Case / Material||Flat / Polycarbonate|
|Consumed power in flashing mode, W||below 5|
|Rated frequency, Hz||50±0,5|
|Axial force of light, cd||above 250|
|Voltage, V||176 - 242|
|Degree of protection||IP54|
|Operating temperature range||from -40 °С to +60 °С|
|Working Hours||yellow signal flashing (flashing frequency 1Hz ± 10%)|
|Service life||10 years|