MT-5 geodesic satellite multi-frequency equipment


The MT-5 geodesic satellite multi-frequency equipment is designed to present the final results digitally and export data to cartographic or geographic information systems (GIS)


Performance Characteristics
Number of channels
Shockproof and waterproof case
A wide range of communication modules
Ethernet; Wi-Fi; Bluetooth V2.1; radio modem
Data transmission frequency
1/10/20/50 Hz
Wide operating temperature range
from -30 °С to  +55 °С
Ergonomic design
Compactness and light weight due to the use of modern materials (magnesium alloy, monoblock case components from composite materials)
High degree of protection against mechanical damage
Received signals of satellites:
Accuracy of measurements * when using an external antenna
* using an external antenna while simultaneously receiving GLONASS, GPS, BEIDOU signals.
Static accuracy
(plan) 3 mm + 1 mm/km
(height) 5 mm +1 mm/km
Accuracy in kinematics
(plan) 10 mm + 1 mm/km
(height) 20 mm +1 mm/km
Hardware features
Dimensions (WxDxH)
86 mm х 32 mm х 120 mm
0.35 kg
Operating temperature
from -30 °С to  +55 °С
Storage temperature
from -40 °С to  +80 °С
Relative to 98%
Air tightness
Shock and vibration resistance
It was tested and complies with environmental protection standards
Electrical characteristics
DC Power Supply Voltage
3.7 V rechargeable battery

Communication and data storage

  • USB v2.0: support for data download and high-speed connections
  • VHF radio modem with a 410-470 MHZ frequency range
  • Built-in GSM-modem
  • WiFi: 802.11 b, g, access point and client modes, WPA / WPA2 / WEP64 / WEP128 encryption
  • External devices for receiving corrections - via serial port, USB Ethernet port and Bluetooth
  • Internal memory 512 MB DDR3 (8 GB SD card)
  • SMB connector for external antenna

Scope of delivery

  • МТ-5 smart terminal
  • A network adapter with a set of adapters (for connection to power grids in the Russian Federation)
  • USB cable
  • UA-35 BD external antenna (by request)
  • Waist Bag
  • Packing (transport box)
  • Passport
  • StaticToRinex Software (on CD)
  • GGO Software (on CD)
  • Instruction manual (on CD).


 The smart terminal comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.