RS-2


RS-2 geodesic satellite multi-frequency equipment


Function

The permanently operating basic station that gives the possibility to create and expand the network of referential and control-correcting stations (CCS), to organize the system of deformations monitoring, high accuracy navigation in agriculture and road building. It provides transfer of corrections by means of NTRIP-protocol. Is has standard interface of external antenna connection. The settings are controlled via Wi-Fi or mains cable. Connection of reference frequency external generator is accessible.


Specifications

Performance Characteristics
Number of channels
372
A wide range of communication modules
Ethernet; Wi-Fi; Bluetooth V2.1; radio modem
Record frequency
1Hz, 2Hz, 5Hz, 10Hz, 20Hz, 50Hz
Ergonomic design
Compactness and light weight due to the use of modern materials (magnesium alloy, monoblock case components from composite materials)
High degree of protection against mechanical damage
Received signals of satellites:
GLONASS: L1, L2
GPS: L1, L2
BEIDOU: В1, В2, В3
SBAS
Accuracy of measurements
Static accuracy
(plan) 3 mm + 1 mm/km
(height) 5 mm +1 mm/km
Accuracy in kinematics
(plan) 10 mm + 1 mm/km
(height) 20 mm +1 mm/km
Hardware features
Dimensions (WxDxH)
222 mm х 164 mm х 79 mm
Weight
2.0 kg
Operating temperature
from -30 °С to  +65 °С
Storage temperature
from -40 °С to  +80 °С
Humidity
Relative to 98%
Air tightness
IP65
Shock and vibration resistance
Is tested and is in compliance with the standards of protection from environmental influence
Electrical characteristics
DC Power Supply Voltage
external source from 9 V to 18 V


Communication and data storage

  • USB v2.0: support for data download and high-speed connections
  • Built-in GSM-modem
  • WiFi: 802.11 b, g, access point and client modes, WPA / WPA2 / WEP64 / WEP128 encryption
  • External devices for receiving corrections - via serial port, USB Ethernet port and Bluetooth
  • memory with 4 Gb volume (by option 32 Gb)


Scope of delivery

  • RS-2 station
  • A network adapter with a set of adapters (for connection to power grids in the Russian Federation)
  • USB/RS-232 cable
  • DB9-RS232 cable
  • Serial cable
  • Antenna cable (3m - on request)
  • BD type antenna
  • Packing (transport box)
  • Passport
  • StaticToRinex Software (on CD)
  • GGO Software (on CD)
  • Instruction manual (on CD).


Software

The station comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.